Installed by CleanCut Bath Employee Installers. Product + labor covered by one warranty.

Call 888-388-9890

Resource Center

Bathtub Cutout vs. Walk-In Tub: Which Is Right for You?

Published · By CleanCut

If you or a loved one is having trouble stepping over the wall of a standard bathtub, you’ve probably come across two very different solutions: a bathtub cutout (sometimes called a bathtub-to-shower conversion) and a walk-in tub. Both make bathing safer and more accessible — but they solve the problem in very different ways, at very different price points, and on very different timelines.

Here’s how they actually compare, so you can make the right call for your home, your budget, and your needs.

The Short Version

Bathtub CutoutWalk-In Tub
Kit only$380–$485 (varies by model)—
Fully installed$1,595 (Step, Deep Step, Ultra-Low) / $1,895 (Convertible)$3,000–$10,000+
Installation timeOften same-day or 1–2 hoursTypically 1–3 days
Keeps your existing tub?Yes — modifies what you haveNo — full tub replacement
Plumbing changes required?NoOften yes
Can you still take a bath?Yes, if desiredYes (that’s its main purpose)
Best forBudget-conscious homeowners, renters, fast turnaroundsHomeowners wanting a dedicated soaking/therapy tub experience

What Is a Bathtub Cutout?

A bathtub cutout is exactly what it sounds like: a low-threshold entry point is cut directly into the wall of your existing bathtub, and a pre-fabricated kit is installed to create a clean, watertight, walk-through opening. Your tub stays where it is — you’re not ripping anything out, and in most cases you’re not touching any plumbing.

Because the tub itself isn’t replaced, a cutout is typically the faster, less invasive, and less expensive of the two options. It’s a modification, not a renovation.

What Is a Walk-In Tub?

A walk-in tub is an entirely new tub unit, purpose-built with a door in the side so you can step in without lifting your leg over a wall. Once you’re inside and the door is sealed, you fill the tub and bathe as normal — many models include jets, heated seats, or other spa-like features.

Because it’s a full tub replacement, installing a walk-in tub is a bigger project. It usually means removing the old tub, making plumbing adjustments to accommodate the new unit’s fill and drain requirements, and in some cases modifying surrounding tile or flooring.

Comparing the Two: What Actually Matters

1. Cost

This is usually the deciding factor. A bathtub cutout is a modification to what you already own, so you’re paying for the kit and a few hours of labor — not a new tub, not new plumbing, not new tile work. A walk-in tub is a full fixture replacement, and the price reflects that: the unit itself, removal and disposal of the old tub, plumbing work, and typically a multi-day install.

If budget is the primary concern, a bathtub cutout is almost always the more affordable path to a safer bathroom.

2. Installation Time and Disruption

A bathtub cutout can often be completed in a matter of hours, with minimal disruption to your bathroom or your routine. A walk-in tub installation is a construction project — expect your bathroom to be out of commission for a day or more, and expect some mess (cutting tile, disconnecting plumbing, etc.).

For anyone who needs a solution quickly, or who only has one bathroom in the home, that difference matters.

3. Keeping (or Losing) the Bathing Experience

Some people assume a cutout means giving up baths entirely — it doesn’t. With a properly installed cutout, you can still fill the tub and bathe if you choose to; the opening simply gives you a safer way in and out. A walk-in tub, on the other hand, is built around the bathing experience — you fill it after the door is sealed, and many models add features like hydrotherapy jets or built-in seating.

If a long soak or therapeutic jets are a priority, a walk-in tub may be worth the added investment. If your main goal is simply a safer way to get in and out, a cutout accomplishes that without changing how you bathe.

4. Resale and Renter Considerations

Because a bathtub cutout modifies your existing tub rather than replacing it, it’s generally viewed as a lower-impact change to a home — a relevant factor if you’re renting, in a senior living community, or thinking ahead to resale. A walk-in tub is a more permanent, visible change to the bathroom, which some buyers value and others may see as needing to be reversed.

5. Plumbing and Compatibility

Bathtub cutouts typically work with your tub’s existing plumbing — no relocation of the drain or supply lines required. Walk-in tubs often require plumbing adjustments to meet the new tub’s fill rate and drain specifications, which can add both cost and time, especially in older homes.

Which One Should You Choose?

A bathtub cutout is likely the better fit if you:

  • Want a safer bathroom without a major renovation
  • Are working with a tighter budget
  • Need the work done quickly
  • Are renting, or don’t want to permanently alter the bathroom
  • Still want the option to take a bath, but mainly need easier access

A walk-in tub is likely the better fit if you:

  • Want a dedicated therapeutic bathing experience (jets, heated seating, etc.)
  • Are already planning a fuller bathroom renovation
  • Have the budget and timeline for a multi-day installation
  • Are not concerned about permanently replacing the existing tub

The Bottom Line

Both options solve the same core problem — making it easier and safer to get in and out of the tub — but they get there in very different ways. A bathtub cutout is a fast, affordable modification that works with what you already have. A walk-in tub is a full replacement built around a dedicated bathing experience, at a higher cost and with a longer installation.

If you’re not sure which makes sense for your bathroom, our team can walk you through your specific setup, budget, and goals — no pressure, just honest guidance.

Ready to move forward? If you’re planning a DIY installation, start with our How To Size & Install guide to make sure you order the right kit. If you’d like professional installation, Get It Installed to find help near you.

Check your area

See if CleanCut installation is available in your area.

We convert the bathtub you already have — installed in hours, not days, by CleanCut employee installers. Enter your ZIP code for pricing and availability.

Prefer to install it yourself? Shop DIY Kits →

Uses your existing bathtub Installed in 2 to 4 hours CleanCut employee installers Fully installed pricing